electrical ratings | |
---|---|
Voltage supply | 4.75...30 VDC |
Consumption w/o load | ≤300 mA (24 VDC) |
Initializing time | ≤1000 ms after power on |
Output signals | A+, B+, R+, A-, B-, R- |
Sensing method | Magnetic |
Status indicator | Color-LED, system OK output |
Interference immunity | EN 61000-6-2 |
Emitted interference | EN 61000-6-3 |
Approval | EN 61000-6-3CE UL approval / E217823 |
electrical ratings (square-wave) | |
Pulses per revolution | 512 … 131072 |
Phase shift | 90 ° ±2° |
Duty cycle | 45…55 % |
Reference signal | Zero pulse, width 90° |
Output frequency | Zero pulse, width 90°≤500 kHz (HTL) ≤2 MHz (TTL) |
Output stages | HTL, TTL/RS422 |
electrical ratings (SinCos) | |
Sinewave cycles per revolution | 512 … 16384 |
Phase shift | 90 ° ±2° |
Reference signal | Zero pulse, width 360° |
Output frequency | ≤500 kHz |
Output stages | SinCos 1 Vpp |
mechanical design | |
Dimensions (sensor head) | 165 x 25 x 93 mm |
Shaft type | ø300...3183 mm (through hollow shaft) |
Axial tolerance | ±5 mm (belt to head) |
Radial tolerance | 1…3 mm (belt to head) |
Protection DIN EN 60529 | IP 67 |
Operating speed | IP 67≤1850 rpm (ø300 mm) ≤150 rpm (ø1500 mm) see diagram below |
Material | IP 67≤1850 rpm (ø300 mm) ≤150 rpm (ø1500 mm) see diagram belowHousing sensing head: aluminium alloy Magnetic belt: stainless steel (1.4104) |
Operating temperature | -40...+85 °C |
Resistance | -40...+85 °CIEC 60068-2-6 Vibration 30 g, 10-2000 Hz IEC 60068-2-27 Shock 300 g, 6 ms |
Weight approx. | -40...+85 °CIEC 60068-2-6 Vibration 30 g, 10-2000 Hz IEC 60068-2-27 Shock 300 g, 6 ms730 g (head) 120 g (belt/m), 17 g (lock) |
Connection | Flange connector M23, 12-pin |
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |