The CX8050 is a controller with a CANopen master interface. Apart from functioning as a CANopen master, it can also be used to support CAN-Layer-2 communication. Alternatively K-bus or E-bus terminals can be series-connected; the CX8050 automatically detects which system is connected during the start-up phase. The control system is programmed via the additional Ethernet interface.
Technical data | CX8050 |
---|
Processor | ARM9, 400 MHz |
Flash memory | 512 MB microSD (optionally expandable) |
Main memory | 64 MB DDR2 RAM (not expandable) |
Protocol | CANopen (master) |
Programming | TwinCAT 2 PLC |
Programming languages | IEC 61131-3 |
Web visualisation | yes |
Online change | yes |
Up/down load code | yes/yes |
Interfaces | 1 x RJ45 10/100 Mbit/s, 1 x USB device (behind the front flap), fieldbus interface |
Bus interface | D-sub connector, 9-pin according to CANopen specification, galvanically decoupled |
I/O connection | E-bus or K-bus, automatic recognition |
Clock | internal battery-backed clock for time and date (battery behind the front flap, exchangeable) |
UPS | 1-second UPS (for 1 MB of persistent data) |
Operating system | Microsoft Windows Embedded CE 6 |
Web-based management | yes |
Current supply E-bus/K-bus | 2 A |
Max. power loss | 3 W |
Dimensions (W x H x D) | 64 mm x 100 mm x 73 mm |
Weight | approx. 180 g |
Operating/storage temperature | 0…+55 °C/-25…+85 °C |
Relative humidity | 95 %, no condensation |
Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
Protection class | IP 20 |
Approvals/Markings | CE, UL, ATEX, IECEx |
Ex-Marking | II 3 G Ex nA IIC T4 GcII 3 D Ex tc IIIC T135 °C DcEx nA IIC T4 GcEx tc IIIC T135 °C Dc |